iSys iTerra IJ1800 - Manual (Page 13)

Page 13
STEP 7.7 STEP 7.8
Press the printheads firmly into their
appropriate slots so they click into place,
returning the handle to its lower position.
Once all of the printheads are in place,
pull the whole printhead cover forward.
STEP 7.9 STEP 7.10
Return the printhead cover to its original
position ensuring that the hook and the
latch engage.
Lower the two hinged flaps until flap 2
clicks into place.
Note: After closing the flap, the printer
will automatically perform internal
calibrations on the printheads and then
on the alignment. There must be paper
loaded in the printer in order to complete
this step.