Sierra Video Ponderosa 3G Series Routing Switcher Family with MediaNav - Manual (Page 125)

PONDEROSA
119
“T”: Trigger a Salvo
The command "T" is used to trigger a previously set up salvo. It must be followed by a
register number from 1 to 32 giving the register to be triggered.
For example, the command:
** T2 !!
says to trigger salvo register 2.
If a salvo is triggered and it fails for some reason, the salvo trigger operation is aborted, and
an error is reported:
For example:
“ERROR Salvo Has Locked Xpts”.
“G” Command
Details of the “G” command can be found on our website or by contacting the factory.