Quintum Technologies Tenor AS - Manual (Page 79)

P/N 480-0059-00-10 6-4
Chapter 6: Advanced Topic: SNMP/IVR
5. From the Quintum CD ROM, click on TenorTools. Download the SNMP Agent Software to
the HP Openview root directory (this is the directory in which HP Openview was installed).
6. From the HP Openview root directory run installquintum.bat. Installation will begin. The follow-
ing section lists where the installation files are copied and which files were modified. You can
use this information to make changes manually to files, if desired.
NOTE: If you have already run the installquintum.bat, you must first run the installlquintum.bat
clean command prior to reinstalling. This command will restore any changes made to the
quintum files back to the default parameters (see below for which files are modified upon
installation).
• These lines are added to the file HPOVRoot\conf\oid_to_sym:
1.3.6.1.4.1.6618.1.1.1:Connector:QDVOIP # QUINTUM Digital Tenor
1.3.6.1.4.1.6618.1.1.2:Connector:QAVOIP # QUINTUM Analog Tenor
1.3.6.1.4.1.6618.1.1.10:Connection:QCVOIP # QUINTUM Chassis Tenor
• These lines are added to the file HPOVRoot\conf\oid_to_type:
1.3.6.1.4.1.6618.1.1.1:Quintum:Epilogue:H # Quintum-Digital Tenor
1.3.6.1.4.1.6618.1.1.2:Quintum:Epilogue:H # Quintum-Analog Tenor
1.3.6.1.4.1.6618.1.1.10:Connection:Epilogue:H #QUINTUM Chassis Tenor
• These lines are added to the file HPOVRoot\conf\C\trapd.conf using the "xnmevents -load"
HPOV command:
OID_ALIAS Quintum .1.3.6.1.4.1.6618
#
#
#
EVENT Critical_Alarm .1.3.6.1.4.1.6618.2.0.1 "Status Events" Critical
FORMAT Received trap:generic #$G specific #$S. $#args:$*
SDESC
T1IU_in_loopback;_network_request
EDESC
#
#
#
EVENT Major_Alarm .1.3.6.1.4.1.6618.2.0.2 "Status Events" Major
FORMAT Received trap:generic #$G specific #$S. $#args:$*
SDESC
Corruption_of_configuration_info.
EDESC
#
#
#
EVENT Minor_Alarm .1.3.6.1.4.1.6618.2.0.3 "Status Events" Minor
FORMAT Received trap:generic #$G specific #$S. $#args:$*
SDESC
RIU_not_installe
EDESC