Quintum Technologies Tenor AS - Manual (Page 19)

1-10 P/N 480-0059-00-00
Chapter 1: Overview
Tenor VoIP Gateway (ASG200 and ASG400) Configuration
The Tenor VoIP Gateway Configuration is used for Phone/FXS port connecting to the VoIP Net-
work. The number of VoIP ports is equal to the number of FXS ports. Calls can be routed in any
direction between any of the ports. See Figure 1-7 for an example of a call origination from the
PBX.
FXS (Phone) Originated Calls. Calls coming from the Phone/FXS interface (i.e. PBX) may be
switched to the data network as a VoIP call. The routing decision made by the Tenor is based upon
your configuration and the dialed number. See Figure 1-7 for an example of a call originated from a
PBX.
Figure 1-7 FXS (Phone) Originated Calls
Keyswitch
Phone
PBX
IP Network
FXS Port