Quintum Technologies Tenor AS - Manual (Page 33)

P/N 480-0059-00-10 2-10
Chapter 2: Hardware Components
RJ-11 Splitter Cable (for ASM400 and ASG400)
An RJ-11 cable is used to connect the Tenor AS to an FXO or FXS external device. The RJ-11 cable
connector pinouts are given in this section to help you identify the proper connector to accommo-
date your specific networking requirements. The RJ-11 connector is the EIA/TIA standard for
Unshielded Twisted Pair (UTP) cable; the wiring color codes are UTP Standard Coloring.
The RJ-11 Splitter cable’s single end is labeled Tenor (see Figure 2-9); the split ends can be a 6-pin
jack (accepts 4-pin plug or 6-pin plug) or 4-pin plug. Each end is labeled A or B (see Figure 2-9) for
pin order.
For illustration purposes, the 4-pin plug is shown in Figure 2-8.
Figure 2-8 RJ-11 Splitter Cable
Figure 2-9 RJ-11 Splitter Cable Pin Order
Top View
4
1
1
4
1
4
Pin# Connects to Pin#
1
2
3
4
1
4
2
3
1
2
3
4
Tenor
B
A