Configure tenor as for connection to cdr server, Establish connection between t, Configure – Quintum Technologies Tenor AS User Manual
Page 55: Establish connection
P/N 480-0059-00-10
4-3
Chapter 4: Advanced Topic: View Call Detail Records
Establish connection between Tenor AS and CDR Server
In order to capture CDRs, a connection between the Tenor AS unit and the CDR server must be
established. A Tenor AS can be configured to connect up to two CDR servers via port 9002 and
9003. Based on configuration, the Tenor AS unit can either establish a TCP/IP session with one or all
of these CDR servers. A flow diagram (Figure 4-1) illustrates the general transfer of information.
Figure 4-1 Flow of CDR Information
Before attempting to collect CDRs, you should configure the desired information. You can assign a
CDR server IP address, CDR server port number, CDR server password, and CDR format informa-
tion using the following CLI commands: cdrserverip, cdserverport, cdrpassword, and cdrformat.
•
CDRServerIPAddr: IP address of the CDR server. (Used when the Tenor AS unit established
connection with the CDR server.)
•
CDRServerPort: The application port numbers used by the CDRServer(s). (Used when the
Tenor AS establishes connection with the CDR server.)
•
CDRPassWord: Password to be used by the CDR server(s).
•
CDRFormat: This configuration parameter command is used to choose which of the possible
Call Data record output formats you would like to send to your CDR server. See
for
information about available formats.
Configure Tenor AS for connection to CDR Server
NOTE:
The CDR Server software is a Windows-based .exe file available on the CD you received
with your system; this software is not supported by Quintum.
Tenor CMS
CDR Server
Tenor CMS connects
to CDR Server automatically.
(after initial configuration of
S erver IP Address & Port Number)
or
CDR Server logs into Tenor CMS'
Port Number 9002 or 9003
TCP/IP Co nnection Established
Sends Welcome Message
Sends Password Prompt
Enters Password
Verifies Password
Provides CMS' IP address &
U nit Name
Provides last CDR Sequence
Number received
Begins delivering CDR's
Tenor AS
DX’s
AS
AS