Quintum Technologies Tenor AS - Manual (Page 71)

5-6 P/N 480-0059-00-10
Chapter 5: Advanced Topic: Diagnostics/Maintenance
Display all Alarms
You are able to display both active alarms and an alarm history as follows:
1. Through CLI, access the Monitor prompt.
2. Type alarm. Both active alarms and the alarm history will be displayed. See section How to Read
Alarms for field definitions.
Figure 5-1 Alarm sample
Minor Log RADIUS server error Displayed when the RADIUS server fails to send
required data or the data sent by the RADIUS
server has improper values. Incorrect information
may contain the following:
RADIUS Server: Credit amount (-1)
RADIUS Server: Credit minus amount
RADIUS Server: Not supported currency
RADIUS Server: Credit time (-1)
RADIUS Server: Credit time < 6 sec
RADIUS Server: Invalid error code
Informational Gatekeeper status Reports the status of the Gatekeeper.
Informational Miscellaneous information Miscellaneous information about the unit is
reported. The contents of this alarm will vary.
Informational Info Software Error Indicates information about miscellaneous soft-
ware error. This does not affect system operation.
Informational Glare occurred An incoming and outgoing call went through at the
same time, and the remote end call did not back off,
but the situation was corrected.
Severity
(appears as
part of severity
field)
Alarm Description
(text appears in desc field)
Definition
IP# Sequence#Type#Severity# Desc# Slot# Device# Analog Interface# Channel# Date/Time
192.166.28.230:944:ALR:3:Border Element connection lost:0:0:0:0:TUE OCT 14 14:05:27 2003
192.166.28.230:946:RPT:4:Gatekeeper status (Gatekeeper(0.0.0.0) removed):0:0:0:0:TUE OCT 14
14:05:27 2003