MMD Equipment IGR1000 - Manual (Page 23)

MMD PowerPro Inverter Generators • IGR1000P • IGR2000P • IGR2600HP (041715) MMD PowerPro Inverter Generators • IGR1000P • IGR2000P • IGR2600HP (041715) Page 44 Page 45
13. Warranty 14. Emission Control System
For all MMD Equipment PowerPro Inverter Generators
Buyer Information:
Generators that are supplied with applicable products as
standard, original equipment are covered by this warranty
from the date of original retail purchase for a period of
three years for residential use and one year for commercial
applications. Batteries shipped with generators are
warranted by the supplier. Units used in rental fleets or as
demonstration models will be considered commercial usage.
The warranty coverage is continual from the original date
of purchase, and does not restart upon the replacement of
any part or complete unit. Individual parts replaced at any
point during the warranty period are only eligible for warranty
coverage for the balance of the original warranty period.
To be eligible for warranty service, the product must
be purchased in the United States or Canada from an
authorized MMD dealer. This warranty applies to the
original retail purchaser only and is not transferable. Proof
of purchase and registration is required. Parts and service
labor will be covered by MMD Equipment for any failure
that is proven to be a failure in material or workmanship
under normal use during the applicable warranty time
period. This coverage is limited to parts, and labor. It is
the responsibility of the end user to return the product to
the nearest authorized repair center as directed by the
warranty administration office. MMD Equipment reserves
the right to repair or replace any part or unit at its option.
MMD Equipment may request defective parts to be returned.
Anything replaced under warranty becomes the property of
MMD Equipment.
THIS WARRANTY DOES NOT EXTEND TO PARTS
AFFECTED OR DAMAGED BY ACCIDENT AND/OR
COLLISION, NORMAL WEAR, FUEL CONTAMINATION
OR DEGRADATION, USE IN AN APPLICATION FOR
WHICH THE PRODUCT WAS NOT DESIGNED OR
ANY OTHER MISUSE, NEGLECT, INCORPORATION
OR USE OF UNSUITABLE ATTACHMENTS OR PARTS,
UNAUTHORIZED ALTERATION, OR ANY CAUSES OTHER
THAN DEFECTS IN MATERIAL OR WORKMANSHIP OF
THE PRODUCT. THIS WARRANTY DOES NOT EXTEND
TO NORMAL MAINTENANCE ITEMS SUCH AS BELTS,
HOSES, SPARK PLUGS AND FILTERS PAST THE FIRST
SCHEDULED REPLACEMENT OR SERVICE INTERVAL
FOR THESE ITEMS WHICHEVER COMES FIRST. MMD
WILL PAY FOR MINOR ADJUSTMENTS FOR A PERIOD
OF NINETY DAYS FROM THE INSERVICE DATE OF
THE GENERATOR.MMD DENIES ANY RESPONSIBILITY
FOR LOSS OF TIME OR USE OF THE PRODUCT,
TRANSPORTATION, COMMERCIAL LOSS, OR ANY
OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGE.
ANY IMPLIED WARRANTIES ARE LIMITED TO THE
DURATION OF THIS WRITTEN LIMITED WARRANTY.
Product Line Commercial Retail
Inverter Generators 1 Year 3 Years
The U.S. Environmental Protection Agency (EPA) require
manufacturers of small off-road engines to warranty their
products with a two year warranty for those components
that are specified as being part of the emission control
system. MMD Power Equipment and EPA offer the following
explanation of the Emission Control Warranty. In the United
States and Canada, new small off-road engines must be
designed, built, and equipped to meet stringent emission
standards. MMD must warrant the emission control system
on your 2011 engine for the periods of time listed below
provided there has been no abuse, neglect, improper
maintenance, or unauthorized application of your small off-
road engine. If a warrantable condition is determined, MMD
Equipment will repair your small off-road engine at no cost to
you including diagnosis, parts, and labor .Emissions control
parts on the engine are warranted for a period of two years,
subject to provisions set below. If any covered part on your
engine is defective, the part will be repaired or replaced by
MMD Power Equipment. You are responsible to maintain the
engine as defined in your MMD Generator Owner's Manual.
MMD recommends that you retain all record/receipts
covering maintenance on your engine but MMD Equipment
cannot deny warranty claims based on the lack of receipts
or for your failure to perform all scheduled maintenance. You
may be denied warranty coverage if a part has failed due
to abuse, neglect, improper maintenance, or unapproved
applications.
Repair or replacement parts are warranted for ninety (90)
days from the date of purchase. Any part replaced during
the base warranty period assumes the remainder of that
warranty period or ninety (90) days, whichever is greater.
An exception is made for the following parts which will be
warranted for six months (180 days) from date of purchase.
Selected generator parts: alternator assembly, stator, rotor,
inverter module. Selected power train parts: replacement
long block, cylinder block, cylinder head, crankshaft,
camshaft, balance shaft, manifolds, and major castings. To
be eligible for warranty coverage, the replacement part must
have been purchased in North America from an authorized
MMD distributor or dealer. This warranty applies to the
original retail purchaser only and is not transferable. Proof of
purchase is required. Parts exported from North America are
excluded from warranty coverage. (1) Repair of replacement
parts will be covered by MMD Equipment for any failure that
is proven to be a failure in material or workmanship under
normal use during the warranty period. The warranty for
replacement parts will be limited to direct replacement only
with no allowance for freight and transportation charges. The
issuance of credit or a cash return of the purchase price will
not be applicable. MMD Equipment may request defective
parts to be returned for examination before the issuance
of credit. (2) Reimbursement of labor charges to replace a
defective part under its warranty period will be limited only
to authorized service centers and then only if an authorized
service center installed the defective part. Travel time is not
authorized.
Emission Control System Warranty
In the United States and California, new small off-road engines must be designed, built and equipped
to meet stringent emission standards. MMD Equipment must warrant the emission control system on
your generator engine for the periods of time listed below provided there has been no abuse, neglect,
improper maintenance, or unauthorized application of your small off-road engine.
If a warrantable condition is determined, MMD Equipment will repair your small off-road engine at no
cost to you including diagnosis, parts, and labor. Shipping of your unit to and from a warranty service
center is not covered by this warranty.
Coverage
Emissions control parts on the engine are warranted for a period of two years, subject to provisions
set below. If any covered part on your engine is defective, the part will be repaired or replaced by
MMD Equipment.
Owner’s Responsibilities
You are responsible to maintain the engine as defined in your MMD Equipment Owner’s Manual. MMD
Equipment recommends that you retain all record/receipts covering maintenance on your engine,
but MMD Equipment cannot deny warranty claims based on a lack of receipts or for your failure to
perform all scheduled maintenance. You may be denied warranty coverage if a part has failed due to
abuse, neglect, improper maintenance, or unapproved applications.
You are required to bring your generator to an authorized MMD Equipment dealer for repairs as soon
as a problem exists. For emissions warranty service, contact your nearest dealer. For a listing, visit
www.mmdequipment.com/warranty-claims.html, or by calling 800-433-1382.
Emission Control System Parts
Coverage under this warranty extends only to the emissions control parts listed below:
1. Fuel System
A. Carburetor gaskets
B. Fuel lines, fittings, and clamps
C. Fuel filter (if equipped)
D. Fuel pump (if equipped)
E. Carburetor
2. Intake System
A. Air cleaner assembly
B. Intake manifold
3. Ignition System
A. Ignition coil
B. Spark plug
4. Exhaust System
A. Catalytic converter (if equipped)
B. Exhaust manifold
C. Gaskets
5. Crankcase Breather System
A. Breather assembly
B. Breather tube
6. Air Injection System
A. Secondary air injection valve
7. Fuel Tank Evaporative Emissions Control System
A. Fuel tank
B. Fuel cap
C. Carbon canister and brackets
8. Miscellaneous Items used in above
A. Hoses, connectors, and fittings
B. Electrical switches