Digital Alert Systems DASDEC-II MANUAL - Manual (Page 37)

Digital Alert Systems: DASDEC User Manual
31
When you have all of the remote host descriptors entered properly, and you have confirmed SSH connectivity to
each remote host, you may safely update the public/private keys for the entire group by clicking on the button
. You may also return to the prior set of keys by clicking the button
.
The status of the last group management operation is printed just below the button.
This gives a date and useful information about the last SSH management operation performed from this
DASDEC II.
The page display areas below the SSH Management interface provide two more useful pieces of information
about SSH. The first display shows the current SSH DSA Public Encryption Key and its installation date. Below
this is a printout of the "authorized keys" file. This shows remote hosts authorized for SSH connections to this
DASDEC II.
4.2.3 Proxy
Current Optional HTTP/HTTPS Proxy server assignments for getting CAP data
The server can be optionally configured to access remote http and/or https data (for CAP data) via a defined
proxy server address. Enter the hostname:port in the appropriate field. This option would be enabled if the user
wanted to use defined proxy servers for CAP data acquisition via HTTP/HTTPS.
4.3 Setup > Time: Server Date and Time Configuration
The Setup Time page allows the hardware clock on the DASDEC II to be set. Date, time, and time zone may be set.
Setup > Time: web page