Digital Alert Systems DASDEC-II MANUAL - Manual (Page 132)

126
Digital Alert Systems: DASDEC User Manual
TDX portion
If the alert has TDX details data, information is appended to the text translation for the alert. Also, links to any
TDX provided URL information is displayed. These links can be followed to traverse to web pages with more
detailed information relevant to the alert. TDX details must originate from the alert source.
5.2.1 Incoming & Incoming/Decoded Alerts: Multistation Mode
The active decoded alerts display supports' multistation mode. Active (enabled) stations are indicated on the
right side of the page just above the active decoded alerts table. Within the active decoded alert status a target
station ID and a
button is displayed for each enabled station. Alerts can be forwarded to any station
by simply pressing the appropriate button. The screen shot below shows one active,
unacknowledged decoded alert, with two available enabled station targets and thus, two buttons,
one per station. A single and button is provided to
cover multistation mode. Note that in multistation mode, to customize the alert audio/text translation, you must
run the Edit/Review process separately before station forwarding.
A severe EAS alert might need to be forwarded more quickly than to each enabled station in sequence.
Therefore, a separate button, labeled
, is available and can be pressed to forward the
alert to the Base station configuration. If this button is used, make sure the base station configuration will trigger
the appropriate peripheral devices and relays in order to insure that the alert is sent to all broadcasting stations.
Decoder > Incoming/Decoded Alerts page showing decoded alert and two stations