Microtel Series 1000EX - Manual (Page 55)

MICROTEL Series 1000EX Dialer
49
Example 4- Program phone number 4
| To send a Fax report
| | To 555-1212
| | | Terminate telephone entry
| | | |
Command:
0**104*991 5551212 **
Response: Telephone number four is STAR nine nine one five five five one two one
two.
The *991 escape sequence shown must be embedded within telephone numbers
calling to FAX machines. This tells the dialer to begin to generate a FAX report
before it goes off-hook and dials the remote machine. Always put the *991 sequence,
as well as any other non-call progress sequences (such as auto acknowledge), at the
beginning of the telephone number string before the dialer goes off-hook to dial
regular telephone digits.
Example 5-
Program phone number 2
| No Voice Message (Pager)
| | Auto acknowledge call
| | | Dial Pager Terminal (Example Phone #)
| | | | Wait 30 seconds for Answer
| | | | | Wait 4 Seconds After Answer
| | | | | | Dial No. for pager
Command:0**102*940*90 5551212 *730*4 *2*2 5556565 **
This example illustrates using a pager system.
NOTE: Some pagers do not accept the ‘*’ (*91) or ‘#” (*92) dtmf tones as input. Also,
some require the ‘#’ (*92) to terminate the input sequence. See pager system
documentation for details.