Microtel Series 1000EX - Manual (Page 17)

MICROTEL Series 1000EX Dialer
CHAPTER 2 - Installation
nstallation of the Series 1000EX involves several, simple steps. This chapter outlines
the 5 steps necessary to quickly get the dialer up and running. At the end of the
chapter is a Quick Start procedure which configures the dialer for simple call-on-
alarm operation. Refer to the appendix for outline and mounting diagrams of the
dialer.
I
Step One - Connect the Power Supply Connect the supplied external Stancor
transformer to the 12VDC terminals as shown in Figure 3 below and Figure 4 on the
following page for the complete power connection options. Plug the transformer into a
Surge Suppressor (supplied with the dialer).
Figure 3. Power Supply Connection
11