Microtel Series 1000EX - Manual (Page 37)

MICROTEL Series 1000EX Dialer
31
As described in the theory of operation in Chapter 1, the dialer can store up to thirty two
(32) phone numbers in the System Telephone Directory. This section explains how to
program the dialer’s telephone numbers and shows how to customize the numbers for
certain call-out situations.
Use the following command to enter each telephone number into the Series 1000EX
dialer:
0*1nn*
Review Telephone nn (nn=01 to 32)
0**1nnp** Program Telephone nn (nn=01 to 32)
p = telephone number of up to 60 digits with escape codes for one of thirty two (32)
telephone numbers. The telephone data is terminated with ‘**’ (two asterisks).
Example- Command:
0**1012760571**
Response: Telephone number one is two seven six zero five seven one
Example- Command:
0**1052432400**
Response: Telephone number five is two four three two four zero zero
These phone numbers may be customized to use the Call Progress features of the dialer.
Refer to the Advanced Topics chapter for a full discussion about using these powerful
features of the Series 1000EX Dialer.