Microtel Series 1000EX - Manual (Page 34)

MICROTEL Series 1000EX Dialer
28
0**080* Disable Callback Acknowledge
0**081* Enable Callback Acknowledge
Example- Command:
0**081*
Response: Callback Acknowledge is Enabled.
z Snooze Delay This is the amount of time an acknowledgement for a channel’s alarm
will last. During this time delay, no callouts for this channel’s alarm will be made. If
the channel’s alarm condition persists after this snooze delay expires, callouts will
once again be made for this channel’s alarm.
0*74*
Review snooze delay time interval
0**74DDHHMM* Program snooze delay time interval
Example- Command:
0**74001234*
Response: The snooze delay is one two hours three four minutes.
z System Telephone Number A telephone number of up to 16 digits used as
identification within a FAX header.
0*100* Review System Telephone number
0**100p** Program System Telephone number
NOTE: FCC Regulations require a phone number be included in the header
of any FAX. See Appendix for more on the FCC requirements.
Example- Command: 0**1005551212**
Response: The system telephone number is five five five one two one
two.