ILY SATA DVD/CD Duplicator Controller - Manual (Page 13)

6. Drive Info: Checks the make, model, firmware and the channel (port) of the drive(s) that are
connected to the duplicator controller.
Press ENT
Press or to select
different Drives
7. System Info: Checks the model number, buffer memory and firmware version of the
duplicator controller.
Press ENT
9 . Copy Counter: Shows count. Enables counter and clears counter.
Press ENT
8. Update BIOS: Updates the BIOS (firmware) of the duplicator controller.
Press ENT
Insert update CD
and press ENT
Update completed and
eject disc
Re-boot system
10. Setup – This command contains options to configure the duplicator system.
1. Start-up Menu: Sets the command to be displayed first when the machine is powered up and
initialized. All primary commands are available to be set for Start-up: Copy, Test, Copy + Verify,
Copy + Compare, etc.
Press
ENT
or to select function and
press ENT to confirm
3. Full Erase: Performs a full erase of rewritable (RW) media for next use.
Note: Do NOT perform this function with recordable (R) media.
Insert re-writable disc
and press ENT
Finish Full Erase
and eject discs
4. Eject All Discs: Performs a simultaneous ejection of all of the optical disk drive(s) on the duplicator.
Press ENT All disc trays will open
5. Disc Info: Checks the capacity and space used on the disc(s) inside of the drive(s) of the duplicator.
Press ENT
11