ILY SATA DVD/CD Duplicator Controller - Manual (Page 12)

or and press ENT to set audio CD burning speed
or and press ENT to
set DVD burning speed
or and press ENT to
set DVD DL burning speed
8. Source Select – This command will allow you to change the source drive to any one of the drive(s)
inside the unit, including the HDD (if installed).
To change the source drive inside the unit to a different drive:
1. Power on the machine (if not already on).
2. Use the Scroll buttons to select the “8. Source Select: Press the ENT button.
3. The current Source Drive will be displayed along with the partial model number of the drive
and the port number in brackets.
4. Use the Scroll buttons to select from other available drives until the port number of the desired
drive is displayed.
5. Press the ENT button. The desired drive will then become the Source Drive.
Press ENT
Display current Source
Drive setting
10
or
to select drive
Press ENT and select image file.
9. Utility – This command contains various tools to check functionality of the drive(s), information of the
components, and other system information.
1. Prescan: Prescans the master disc and verifies the integrity and quality of the master disc.
a. Select Utility and press ENT to enter the sub-menu.
b. Select 1. Pre-scan and press ENT
Press
ENT
Finish
Prescan
2. Quick Erase: Performs a quick erase of rewritable (RW) media for next use.
Note: Do NOT perform this function on recordable (R) media.
Insert re-writable
discs and press ENT
Finish Quick Erase and eject discs