ILY DiscLock DVD/CD duplication - Manual

1. Power on the duplicator (if not already on).
2. Use the Scroll buttons to select “12. Enable DiscLock” from the Main Menu. Press the ENT button.
Note: If there is a HDD present in your duplicator, this feature will be #13 instead of #12.
3. This enables the DiscLock feature.
Press ENT to load disc
and enable DiscLock
Note:
When the DiscLock feature is enabled the menu options are the following:
Press ENT to load
disc and execute
copying
Analyzing
source disc
Start Copying
Finished and
eject discs
Press ENT & ,
Press ENT
Special Feature: DiscLock DVD/CD duplication
The “DiscLock” feature implements a simple encryption protocol on your copied discs so they cannot be
copied in another duplicator. Protect your copies and your investment from unauthorized duplication with the
“DiscLock” feature.
How to Enable the DiscLock Feature
The DiscLock feature will work for DVD-R only. DVD+R and CD formats are not supported at this
time but may be supported with a firmware revision in the future.
In order for the DiscLock Feature to be successfully implemented on your DVD-R discs, 40 MB of
free space must be allocated on the blank DVD-R discs.
The DiscLock feature is only used for DVD to DVD (disc-to-disc) copying. The HDD-to-disc copying
cannot support this feature as the HDD cannot be used in conjunction with the DiscLock feature.
This feature is only for the DVD-Video format only. DVD-Data and other formats are not supported at
this time but may be supported with a firmware revision in the future.
1. DiscLock Copy: The DiscLock copy function is the copy function with added DiscLock protection
protocol that is implemented on the copied disc(s).
2. Set Burn Speed – This feature allows you to set the burn speed for DVD’s with DiscLock feature
implemented (1, 2, 2.4, 4, 6, 8, 12, 16, 18, 20, MAX).