ILY SATA DVD/CD Duplicator Controller User Manual
Page 11

9
6. Compare – This command compares copied disc(s) to the master disc and ensures that the copies
are exact duplicates of the master disc. This command is especially useful for DVDs, data CDs and video
CDs.
Note:
The Compare process is a bit-by-bit comparison between the master disc and the copied discs. This operation ensures
that all of the copies are completely identical to the Master disc. This command is not applicable to audio CDs.
To start the Compare process, please follow the instructions below.
1. Power on the machine (if not already on).
2. Eject disc tray of the Source Drive and place the master disc in the designated Source Drive (usually
the top). The “master disc” is the original of which copies are made.
3. Eject disc tray(s) of the Writer Drives and place copied disc(s) to be compared on the tray(s).
Number of drives used depends on number of copies to be compared. It is not necessary to always
use all drives.
4. Use the scroll buttons to select the command “6. Compare” and press the ENT button. The drives
will automatically close trays and begin the compare process.
5. Once the compare process is complete, the trays will eject the discs that have passed the compare
process.
Load discs
and press ENT
Start
comparison
Finish and
eject disc
7. Set Burn Speed – This feature allows you to set the burn speed of various types of disc: CDs (data and
VCDs), audio CDs, DVDs and dual-layer DVDs (DVD DL)
Selectable burn speeds:
CD:
1, 2, 4, 8, 10, 12, 16, 20, 24, 32, 36, 40 (default), 44, 48 MAX.
Audio CD:
1, 2, 4, 8, 10, 12, 16, 20, 24 (default), 32, 36, 40, 44, 48, 52, 56, MAX.
DVD:
1, 2, 2.4, 4, 6, 8, 12, 16 (default), 18, 20 MAX.
DVD DL:
1, 2 (default), 2.4, 4, 6, 8, 12, 16, 18, 20, MAX.
To Set the Burn Speed:
1. Power on the machine (if not already on)
2. Use the Scroll buttons to select “7. Set Burn Speed”. Press the ENT button.
3. The first speed selection is for general CDs. Use the Scroll buttons to select the desired burn speed
and press the ENT button.
4. The second speed selection is for audio CDs. Use the Scroll buttons to select the desired burn speed
and press the ENT button.
5. The third speed selection is for DVDs. Use the Scroll buttons to select the desired burn speed and
press the ENT button.
Note: The selection is only available on DVD duplicators.
6. The fourth speed selection is for DVD DL. Use the Scroll buttons to select the desired burn speed and
press the ENT button.
Note: The selection is only available on DVD duplicators.
Press ENT &
or
or
and press ENT to set
general data CD burning speed