Klslg raxes and other oììiiììì, Telephone answering device – Brother Fax 980 M User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■■■iiiiie
nil
KlslG RAXES AND OTHER OÌÌIIÌÌÌ
...
incoming Call
The can is picked up
by the external TAD.
(Recommended short
ring delay such as 1
ring or 2 rings.)
Fax reception Is
automatically
activated by the
CNG Fax Tone.
Auto dial
fax call
The external TAD
outgoing message
begins (recommended
length of less than
20 seconds).
Voice call
Manual
fax call
The caller must
press your remote
code to activate
the fax machine.
The fax message
The caller leaves a
1
1
The fax message is
is received on
paper.
voice message on the
external TAD.
The caller
can also
received on paper.
send a fax message.
Telephone Answering Device
1. Set the telephone answering device so that it is ready to record incoming telephone calls.
2. Set the number of TAD rings to one or two.
3. Try to record the shortest possible message on your telephone answering device (up to
20 seconds).
Please note that some faxes that are sent manually cannot be received automatically because
some fax machines do not send a fax tone in manual mode.
So you must indicate a remote activation code for the caller to enter. (See page 7-5.)
7-8