Brother Fax 980 M - Manual (Page 27)

8. Press SET.
You will be promp
company’s name.
9. Enter the name by using the number
keys (up to 20 characters).
Example: BROTHER.
Refer to the section “How to Enter Text in
the Function Mode” on the page 3-5, 6.
10. Press SET to confirm the entry.
11. Pres s STO P to return to date and time.
M A M E : B R O l H E R
E N T E R / P R E S S S E T T O E N D
4 . S E T S ' A T T O N I D
5 . T A X R E M O T E C O D E
Helpful Hinfs 1. The telephone number which you stored above is only used for the Cali Back
Message and the Cover Page features.
2. If you do not enter a fax number, no additional information can be entered.
3. When you enter a space, use —► (right arrow). Then it will be registered as a
blank space,
NOTICE
The Telephone Consumer Protection Act. of 1991 makes it unlawful for any person
to use a computer or electronic device to send any message via a telephone fax
machine unless such massage clearly contains in a margin at the top or bottom of
each transmitted page or on the first page of the transmission, the date and time it
is sent and an identification of the business or other entity, or other individual
sending the message and the telephone number of the sending machines or such
business, other entity, or individual.
In order program this information into your fax machine, you should complete the
steps of the previous page.
Storing One-Touch Dial Numbers
You can dial numbers automatically by storing telephone or fax numbers as One-Touch dial
numbers. You can also store names with the numbers so that when you call, you can verify the
destination on the display. You can store a maximum of 20 phone numbers for FAX-900 (01-20)
and 60 phone numbers for FAX-950M/980M (01-60). To use 31 to 60 One - Touch number locations
(FAX-950M/980M), you need to press SHIFT. For example. One - Touch location “31” is accessed
by pressing SHIFT + One-Touch “01” simultaneously. Here is how to store a telephone number
as a One-Touch dial number:
4-4