Telephone function sehings – Brother Fax 980 M User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Siiliii
illllK
TELEPHONE FUNCTION SEHINGS
FOR YOUR INFORMATION
Types of Numbers
When you store a number as a One-Touch or as a Speed-Dial number, you have a
choice of choosing what type of number it is. There are 4 options:
1. FAX (A fax number).
2. TEL (A telephone number).
3. F/T (Both a fax number and a telephone number)
4. CHAIN (A number, usually an access code, for chain dialing).
Chain Dialing
Sometimes you may want to choose from among several long-distance carriers when
you make a call. This is because rates may vary depending on the time and
destination. To take advantage of low rates, you can register the access code of a long
distance carrier as a One-Touch or a Speed-Dial number for chain dialing. To do this,
you store the access code as you would a regular number and register it as a “chain”
number. (See the step 10 of page 4-5.) Then, when you want to make a call, you use
this number in combination with the regular number, which also may be a One-
Touch or a Speed-Dial number.
You can start a chain dialing call by pressing a One-Touch key or SPD. DIAL and
the two digits that has an access code. Next you press another One-Touch key or
SPD. DIAL and the two digits which has the regular phone number or press the
number manually, and then press START to begin calling.
4-6