Brother FAX-210 - Manual (Page 43)

34
£.
1
EXPLANATION
Outgoing Message length selection
The length for the Outgoing Message (OQM) is 8, 12 or 16 seconds. When you press
"1", the LCD displays:
r- MSG CTR
OGM TIME:08 AUTO ANS
■PASSWORD
Use the cursor keys to select the desired OGM length, i.e., 8, 12 or 16. Input by ten key
pad is nol accepted.
The longer the OGM, the less time Is available for the
Incoming MessagesI
If you press NEXT, the OGM time selection will be registered and the LCD will prompt you to
the next function (see #2 below):
MSG CTR
OGM:RECORD — AUTO ANS
"•-PASSWORD
If you press SET instead of NEXT the selected OGM time will also be registered and the
LCD reverts to the original:
MSG CTR
MSG CTR(1-8)? — AUTO ANS
PASSWORD
IMPORTANT: Time for OGM cannot be changed when any ICM/MEMO is
recorded.
Recording of OGM
When you press "3", the LCD gives you three choices which you select using the
cursor keys:
MSG CTR
OGM:RECORD
OGM:PLAY
— AUTO ANS
"•-PASSWORD
MSG CTR
— AUTO ANS
^PASSWORD
MSG CTR
— AUTO ANS
^PASSWORD
NOTE: You can not select PLAY or ERASE if you have not recorded the OGM.
(a) When you are in the OGM RECORD mode.
Press START/COPY to record the OGM. The LCD will show:
MSG CTR
OGM:ERASE
OGM:RECORDING — AUTO ANS
"•-PASSWORD
After recording, press STOP and the display will show:
f- MSG CTR
— AUTO ANS
"•-PASSWORD
OGM:RECORDED