Brother FAX-210 - Manual (Page 40)

31
Speak into the microphone. The iength of a MEMO is the same as ICM (see p.42)
When you have finished recording the MEMO, press
STOP. The LCD displays:
_ MSG CTR
- AUTO ANS
■-PASSWORD
MEMO RECORDED
After 2 seconds, the LCD returns to:
MEMO:RECORD
MSG CTR
AUTO ANS
•PASSWORD
Or if you do not press STOP after recording, after the selected MEMO (ICM) time
runs out, the display will automatically return to:
- MSG CTR
- AUTO ANS
^PASSWORD
MEMO:RECORDED
• Press SET to return to the original LCD display:
MSG RECORDED
. MSG CTR
AUTO ANS
■PASSWORD
If you wish to play back MEMOs, press NEXT.
(3) choices:
The LCD displays the following three
PLAY ERS FWD
j_ MSG CTR
-
AUTO ANS
"■-PASSWORD
Press PLAY (HOOK) to playback MEMO's.
Let's take an example.
Suppose that you are in home and have an appointment at 6:00 with your husband. But you want to
change the time and cannot reach him now. In such a case, you can use
the MEMO function. Your
husband can get your message recorded on your FAX-210 using the REMOTE OPERATION function
(see p.41) even if you are out.
Press FUNCTION, and select "9".
- MSG CTR
- AUTO ANS
■-PASSWORD
This LCD display means that the memory is full and you have to erase ICM before recording your
MEMO.
Let's listen to ICMs first. Press NEXT.
_ MSG CTR
- AUTO ANS
■-PASSWORD
Press PLAY. You will hear the ICMs.
Suppose that you received three ICMs, and that you want your husband to listen to only the second
ICM and your MEMO. Then you have to erase the first and third ICMs. To do that, press PLAY
again. While the first ICM is played, press ERASE. And press ERASE during the third ICM.
MSG FULL
PLAY ERS FWD