B. setting the contrast, C. turning the audio beeper on or off, D. turning the transmit report function on or off – Brother FAX-210 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

B. Setting the Contrast

Press "2" in the USER SWITCH SELECTION MODE. The LCD will display:

- MSG CTR
- AUTO ANS

CONTRASTiNORMAL

■-PASSWORD

Select the contrast based on the contrast of the original document. That is, if

the document is light, select the LIGHT setting, if the original is dark, select the

DARK setting. Otherwise, leave the unit in the factory setting position -
NORMAL.

Select the CONTRAST setting using the cursor keys.

If you press SET , the contrast is selected and the display returns to the USER

SWITCH SELECTION MODE.

If you press NEXT, the contrast is selected and the display proceeds to the next
user switch (TURN AUDIO BEEPER ON or OFF).
If you press STOP, the display returns to the standby mode without
registration.

NOTE 1:

When RESOLUTION is set to STD (standard), CONTRAST is automatically
controlled.

NOTE 2:

When RESOLUTION is set to PHOTO, CONTRAST cannot be controlled as

above.

C. Turning the Audio Beeper On or Off

Press "3’' in the USER SWITCH SELECTION MODE. The LCD will display:

MSG CTR

— AUTO ANS

BEEPER:ON

■PASSWORD

Select the ON or OFF setting using the cursor keys

If you press SET , the AUDIO BEEPER ON or OFF is selected and the display
returns to the USER SWITCH SELECTION MODE.
If you press NEXT, the the AUDIO BEEPER ON or OFF is selected and the

display proceeds to the next user switch (SELECT XMT VERIFICATION

REPORT ON OR OFF).
If you press STOP, the display returns to the standby mode without
registration.

D. Turning the transmit report function On or Off

To activate the XMT varification report, follow these steps:

1. Press "5" in the USER SWITCH SELECTION MODE. The LCD will display

r- MSG CTR

XMT VERIFY:OFF

AUTO ANS

■PASSWORD

Select the ON or OFF setting using the cursor keys

If you press SET, the transmit report function (XMT VERIFICATION) ON or

OFF is selected and the display returns to the USER SWITCH SELECTION
MODE.

If you press NEXT, the transmit report function (XMT VERIFICATION) ON or

OFF Is selected and the display proceeds to the next user switch (SELECT

PASSWORD TRANSMISSION MODE).
If you press STOP, the display returns to the standby mode without
registration.