Brother FAX-210 - Manual (Page 21)

12
B. Transmitting documents
Now, you are ready to transmit your document. The exact procedure for transmission depends
on your selection of one of these methods:
• Manual dialing
• One-touch dialing
• Speed dialing
Any of these methods can be used with manual transmission or automatic transmission. If you
use automatic transmission, the unit will feed your document before dialing, and will send in quick
mode. It is a manual transmission if you first pick up the handset or press the
HOOK button
and then dial (either manual dialing, one-touch dialing or speed dialing). If you use one-touch dial
or speed dial and then press the
START button, this is an automatic transmission.
1. One-touch dialing
The procedure for setting up one-touch numbers (up to 10 of them) is described in the PROGRAMMING
THE UNIT section of the Manual. The actual transmission procedure is :
a) Manual transmission
• Insert up to 5 documents into the feeder face down. The LCD shows:
MSG CTR
— AUTO ANS
^PASSWORD
Press HOOK or pick up the handset. The LCD shows:
MSG CTR
— AUTO ANS
^PASSWORD
FAX/COPY READY
FAX:
FAX:BROTHER INDU
FAX:052P263P583
Press the desired one-touch number using the ten key pad. If you have already registered
the receiver's company name, the LCD shows the receiver's ID:
- MSG CTR
- AUTO ANS
-PASSWORD
If you have not registered the receiver's company name, the LCD shows the registered
receiver's facsimile telephone number:
- MSG CTR
- AUTO ANS
-PASSWORD
The unit will start dialing automatically.
When you hear the fax tone, press
START. A completion tone will sound for one second
after the transmission is completed. The LCD will revert to the standby mode.
- MSG CTR
- AUTO ANS
-PASSWORD
b) Automatic transmission
• Insert up to 5 documents Into the feeder face down. The LCD shows:
- MSG CTR
- AUTO ANS
-PASSWORD
01/01/89 00:00
FAX/COPY READY