Kistler-Morse KM STXPlus - Manual (Page 73)

APPENDIX D: TECHNICAL DRAWINGS
D-8
REVISIONS
REV Description ECN Checked Approved Date
A Initial Release 10-229 5-19-10
Approvals Date
venture
M E A S U R E M E N T
150 Venture Blvd.
Spartanburg, SC 29306
Customer Drawing
Title:
Customer Installed Varistor Instructions
Ref:
P/N: TI-STXPlus.Varistor Sheet 1 of 1 REV A
Installation Instructions
For
AC Line Varistors
Shipped along with your STXplus you will find a small plastic bag with 3 Varistors.
These devices must be installed on the incoming AC line that feeds the AC-DC power
supply that supplies the DC power to the STXplus. If the incoming AC power is in
excess of 300VAC then contact the factory for a replacement set of Varistors that will
meet your special needs.
You will install one between L1 and L2, one between L1 and ground, and one between
L2 and ground.
STXplus
J3
+
_
+ AC-DC
- Power
Supply
L1
L2
GND
<300VAC