Panasonic EY7541 - Manual (Page 8)

(2) LED light
Pressing the @ button tog­
gles the LED light on and off.
The light illuminates with
very low current, and it
does not adversely affect
the performance of the
driver during use or its battery capacity.
CAUTION:
• The built-in LED light is designed to illu­
minate the small work area temporarily.
• Do not use it as a substitute for a regu­
lar flashlight, since it does not have
enough brightness.
This product has the built-in LED light.
This product is classified into "Class 1 LED
Product" to EN 60825-1
Class 1 LED Product
Caution : DO NOT STARE INTO BEAM,
(3) Overheat warning lamp
•
m-
y I ^
Off (normal
operation)
Flashing: Overheat
Indicates operation has
been halted due to motor
or battery overheating.
________________________,
The overheating protection feature halts
driver operation to protect the motor and
battery pack in the event of overheating.
The overheat warning lamp on the control
panel flashes when this feature is active.
* If the overheating protect'ion feature acti­
vates, allow the driver to cool thoroughly
(at least 30 minutes), The driver is ready
for use when the overheat warning lamp
goes out.
• Avoid using the driver in a way that
causes the overheating protection fea­
ture to activate repeatedly,
(4) Battery low warning lamp
----------------------------—
\ 1 /
► -a-
1 ^
Off (normal Flashing (No charge)
operation)
Battery protection
feature active
Excessive (complete) discharging of Li-
ion batteries shortens their service life
dramatically. The driver includes a battery
protection feature designed to prevent
excessive discharging of the battery pack.
• The battery protection feature activates
immediately before the battery loses its
charge, causing the battery low warning
lamp to flash.
• If you notice the battery low warning
lamp flashing, charge the battery pack
immediately.
[Battery Pack]
For Appropriate Use of Bat­
tery Pack
Li-ion Battery Pack (EY9L40)
• For optimum battery life, store the Li-ion
battery pack following use vwthout charg­
ing it.
• The ambient temperature range is
between 0"C (32*F) and 40*C (104"F).
If the battery pack is used when ffie
battery
temperatLffe is below 0"C (32°F), the tool
may fail to function properly. In that case,
charge the battery until charging is complet­
ed for appropriate functioning of the battery.
• When battery pack is not in use. keep it
away from other metai objects like: paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a con­
nection from one terminal to another.
Shorting the battery terminals together
may cause sparks, bums or a fire.
•When operating the battery pack, make
sure the work place is welt ventilated.
Battery Pack Life
The rechargeable batteries have a lim­
ited life. If the operation time becomes
extremely short after recharging, replace
the battery pack with a new one.
Battery Recycling
ATTENTION:
For environmental protection and recy­
cling of materials, be sure that it is dis­
posed of at an officially assigned loca­
tion, if there is one in your country.
- 8 -