Attaching or removing battery pack, Iii. operation [main body, Caution – Panasonic EY7541 User Manual
Page 6: Forward rotation switch operation, Reverse rotation switch operation, How to use the beit hook, Iii. operation, Attaching or removing bat tery pack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching or Removing Bat
tery Pack
1, To connect the battery pack:
Line up the alignment marks and attach
the battery pack.
■ Slide the battery pack until it locks into
position.
Aiignment
marks
2. To remove the battery pack:
Push on the button from the front to re-
iease the battery pack.
Button
III. OPERATION
[Main Body]
Switch and Forward/Reverse
Lever Operation
CAUTION:
To prevent damage, do not operate
Forward/Reverse lever until the bit
comes to a complete stop.
Forward Rotation Switch
Operation
1. Push the lever for forward rotation.
2. Depress the trigger switch slightly to start
the tool slowly.
3. The speed increases with the amount of
depression of the trigger for efficient tight
ening of screws. The brake operates and
the bit stops immediately when the trigger
is released.
4. After use, set the lever to its center posi
tion (switch lock).
Reverse Rotation Switch
Operation
1. Push the lever for reverse rotation. Check the
direction of rotation before use.
2. Depress the trigger switch slightly to start the
tool slowly
3. After use, set the lever to its center posi
tion {switch lock).
CAUTION:
■ To eliminate excessive temperature
increase of the tool surface, do not
operate the tool continuously using two
or more battery packs. Tool needs cool
off time before switching to another
pack.
How to Use the Beit Hook
A WARNING!
• Be sure to attach the belt hook securely to
the main unit with the screw firmly fastened.
When the belt hook is not firmly attached to
the main unit, the hook may depart and the
main unit may fall.
This may result in an accident or injury.
• Periodicaiiy check screw for tightness. If
found to be loose, tighten firmly.
• Be sure to attach the belt hook firmly arx)
securely orio a waist belt or other belt. Pay
attention to the unit not slipping off from the
belt. This may result in an accident or injury.
• When the main unit is held by the belt
hook, avoid jumping or running with it.
Doing so may cause the hook to slip and
the main unit may fall.
This may result in an accident or injury.
- 6 -