Preparations, Set date (d), Set month (m) – Panasonic NV-SD450B User Manual
Page 39: Set year (y), Press store, Press exit, Automatic clock setting, Select manual setting, Set time (h/m), Setting the clock of your vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Clock of your VCR
Settings Using On Screen Display
Setting
iiie
Clock of your VCR
The built-in dock is used to activate the timer for
automatic recording and must be set to the correct time.
The built-in digital clock employs the 24-hour system.
If VCR is not correctly set by Auto setup, foliow the
procedure below.
Preparations
• Confirm that the TV is on and the VCR viewing channel
is selected.
•Turn on the VCR.
Manual Clock Setting
Follow the operation guide on screen display.
Operations
1
Press
MENU,
and then select
Settings.
O Select
Clock.
Set
Date (D).
6
Set
Month (M).
Set
Year (Y).
On Screen Display
8
Press
STORE.
The clock will start.
9
Press
EXIT.
Automatic Clock Setting
Follow steps 1 to 2 of the above procedure.
3 Select Automatic setting.
4 Press STORE.
•The clock is set automatically.
Notes:
•The clock operates for at least 60 minutes by its backup
system in the event of power failure.
•When the item “Automatic clock-set Is” is ON on
screen display, Automatic time correcting function is
activated.
The Automatic time correcting function will only work
when the VCR is in standby. This function will not work
during timer recording standby mode.
.c:
CO
to
13
.O
c:
2
Select
Manual setting.
Set
Time (H/M).
•When it is kept pressed, the indication changes in
30-minute steps.
<
39
>