Panasonic NV-SD450B - Manual (Page 13)

21 RESET
To reset the tape counter (elapsed time) to “0:00.00".
•The tape counter is automatically reset to "0:00.00"
when a video cassette is Inserted.
22 CHECK
To check timer programmes.
23 ZERO STOP
For the zero stop function.
24 CANCEL
To cancel the settings made for a timer recording.
25 INPUT SELECT
To select the A1, A2 or A3 external recording source.
26 RECORDiNG SPfLP
To select the tape speed desired for recording.
SP gives the best picture quality.
LP gives the longest recording time.
27 TV SELECT
To set the remote controller for operation of the TV.
28 EXIT
To make On Screen Display disappear on the TV
screen.
29 STORE
To make selections from On Screen Display.
30 A ▼ ◄ ►
To make selections from On Screen Display.
31 MENU
To make On Screen Display Main Menu appear on
the TV screen.
32 Programme Position Selector Buttons
•To select the programme positions (1-99).
9: CO
19:(2D-C0-C0
•To enter a PlusCode.
33 VIDEO PLUS+
Forthe Video Plus+ programming.
34 TIMER REC
To turn the timer recording function on and off.
H is lit or not lit.
Once operating timer recording function, the normal
VCR operation is not possible unless this button is set
to off.
35 OFF
•To programme a timer recording.
•To set the manufacturer number of the TV.
36 ON
To programme a timer recording.
Infra-red Remote Controller
How to select the remote control mode
This remote controller has two remote control modes
VCR1 and VCR2.
igj Remote control mode vCRI;
Press A while holding TV SELECT.
Set to this position on both the VCR and remote
controller for norma) use with one VCR.
(§)■ Remote control mode VCR2;
Press T while holding TV SELECT.
Set to this position when using two Panasonic
VCRs.
© When the VCR mode is not known: Point the remote
controller at the VCR and proceed with step ® or .©■. If
the mode established matches the VCR mode, the
d rr*srsK#
Refer to page 38 as well.
Power Source for the Remote Controller
The remote controller is powered by 2 "AA", "UM3" or "R6''
size batteries. The life of the batteries is about one year,
although this depends on the frequency of use.
Precautions for Battery Replacement
• Load the new batteries with their polarity (0 and ©)
aligned correctly.
•Do not apply heat to the batteries, or an internal
short-circuit may occur.
• If you do not intend to use the remote controller for a
long period of time, remove the batteries and store them
in a cool and dry place.
• Remove spent batteries immediately and dispose of
them,
• Do not use an old and a new battery together, and never
use an alkaline battery with a manganese battery.
C33
CO
Installing the Batteries
<
13
>