Panasonic KX-F700 - Manual (Page 59)

Advanced Instructions
Programming the remote ANS ID
The remote ANS ID is used to access your answering device from a remote location with a touch tone
telephone.
Choose any number from 111 to 999 except a number including “0”.
Make sure that the first 2-digit number of the remote ANS ID is different from the junk mail prohibitor ID.
( ) menu
CD CD CD
o
START/SET
O
Press MENU.
1.SYSTEM SET UP
Press #10.
REMOTE ANS ID
Press START/SET.
ID=111
0
CpCpCp
c J) c J)C a )
CDCj)®
CE)®®
START/SET
O
( ) menu
Enter the desired
number (111-999).
Press START/SET to
store the setting.
Press MENU to end the
program.
Note:
•
recommend that you do not use seven (7) as an ID number, because this number is used as the
greeting message re-recording command for remote operations.
Listening to the recorded messages in the common memory
©(f)©
[*]{©[*]
(Your phone
number)
a©®
(Remote ANS ID)
GHI JKL
4
or
5
^ Call your unit.
—The unit will play the greeting message.
Q Press the remote ANS ID during the common
greeting message.
—A long beep and a short beep(s) will sound.
Short beep(s) indicate(s) the number of
newly recorded messages.
Short beeps will sound up to 8 times even if
9 or more calls are recorded.
o Press 4 to listen to newly recorded messages,
or
Press 5 or wait for 4 seconds to listen to all the
recorded messages.
Note:
•
If you hear 6 beep tones after playing back
messages, the memory is full. You must erase
some or all messages.
If you want to listen to messages in the maiibox after playing back messages in the common
memory;
1. Press * and 1,2 or 3 (desired mailbox number).
2. Press the mailbox password.
3. Press 4 (for new message playback) or 5 (for all message playback) to play back messages.
59