Programming the mailbox password, Cpcpcp, Cpcpcj) – Panasonic KX-F700 User Manual

Page 55

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advanced Instructions

Programming the mailbox password

Program your own password for your mailbox to prevent other users from retrieving messages. You can

choose any 3-digit number except a number including “0”.

CpCpCj)

cpcpcp

CD®®
®®®

Press MENU.

1.SYSTEM SET UP

For the mailbox 1, press

#51.
or

For the mailbox 2, press

#52.
or

For the mailbox 3, press

#53.

Example:

Mailbox 1

BOXI PASSWORD

cpcpcj)

®CDC®
(2)®(®

®®®

Press START/SET.

NO. ^

Enter the new password

(111-999).

Press START/SET to

store the setting.
—To program other

passwords, repeat
from step 2.

Press MENU to end the
program.

Note:

•

We recommend that you do not use seven (7) as a password number, because this number is used as the

greeting message re-recording command for remote operations.

How incoming messages are recorded into each mailbox

_________________

In order to leave a message in a mailbox, each owner of the mailboxes must inform their callers of their

mailbox number in advance and set the unit in the

ANS/FAX

mode.

O A caller may call your unit (from a touch tone

telephone only).
—The common greeting message will be

heard.

0 They may press -)f, then enter the desired

mailbox number (1-3).

—Personal greeting message will be heard,

followed by a long beep.

e They may leave a message in the mailbox.

Note:

• If a caller does not specify the mailbox in step 2,

the message will be recorded into the common

memory.