Panasonic Panafax UF-755 - Manual (Page 128)

Troubleshootíng
Info.
Code
Meaning Action Page
416/417
418/419 Received data has too many errors. Check with the other party. "
420 Machine goes to receiving mode, but receives no
command from the transmitting side. 1. Remote side mlsdial.
2. Check with the other party.
”
422/427 interface is incompatible. Check with the other party. --
430/434 Communication error occurred while receiving. Check with the other party. --
436/490 Received data has too many errors. Check with the other party. --
456 • Unit received a confidential document or was
requested to be polled of a confidential document
under any of following conditions.
1) Memory does not have enough space to
receive the confidential document.
2) Confidential Mailbox file is fuil (10 files).
3) While printing received document.
• Unit was requested to relay a document.
1. Printout File List then check the contents.
2. Wait a moment until finishing the printing.
76
492/493
494
Communication error occurred while receiving. Check with the other party. "
495 Telephone line disconnected. Check with the other party. --
540/541
542
543/544
Communication error occurred while transmitting. 1. Reload the document and send again.
2. Check with the other party.
550 Telephone tine disconnected. Check with the other party. --
552/553
554/555 Communication error occurred while receiving. Check with the other party. --
623 No document was on the ADR Reload the document and send again. --
630 Redial was not successful due to a busy line or no
response from the called station. Reload the document and send again. --
631 During dialling, STOP was pressed. Reload the document and send again. --
634 Redial was not successful due to a busy line or no
response from the called station. Reload the document and send again. —
638 Power failure occurred during the communication. Check the power cord and plug. 20
870 Memory overflow occurred while storing
documents into memory for transmission.
Transmit documents without storing into memory.
Order additional memory option. 50
879 Memory overflow occurred while receiving
documents into memory.
Receiving documents with data that is greater than
the memory size.
Check recording paper and toner cartridge. 16
18
975 DRAM parity error. The document information in
memory is lost.
1. Unit will print out a Power Failure Report.
2. Resend the lost document.
121
126