beautypg.com

Lrpuble$hc^tm – Panasonic Panafax UF-755 User Manual

Page 126

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

lrpuble$hc^tm§

Mode

Symptom

Action

page

Vertical lines printing
on the received

Printout a Journal report (e.g. FUNCTION, 6,1 and SET) and
check quality to make sure if your machine has trouble or not.

111

document

If Journal report quality is OK, your machine has no probiem,
report to sending party that they have a problem.

If copy is NG, replace the Toner Cartridge.

16

Print Copy Quality
Problems

Fuzzy print

1. Make sure you are using the correct paper for the best

possible print quality.

137

2. Try reversing the recording paper to the other side.

Missing dots or
lines/inconsistent

1. Make sure you are using the correct paper for the best

possible print quality.

137

darkness within print

2. Replace the Toner Cartridge.

16

Print Copy Quality

Fading print

The Toner Cartridge may be running out of toner. Replace the
Toner Cartridge.

16

Problems

Faint print

You may need to choose a different paper for the best possible
print quality.

137

No dial tone

1. Check the connection of telephone line.

2. Check the telephone line.

133

No auto answer

1. Check the connection of telephone line.

2. Check Reception mode setting.

59

Communication

Problems

3. Check if machine is printing a report, (e.g.: 32 Transaction

Journal, Fax Parameter List).

If machine is printing a report, machine cannot receive until
printing is completed.

4. If the printed document is 32nd Transaction, machine will

usually print the 32 Transaction Journal automatically after

printing out the document. In this case, machine cannot

receive until the 32 Transaction Journal has been printed.

Cannot transmit or

receive

An information code will be shown on the display. Refer to the

information code table to find out the trouble.

125

No Unit Operation

No unit operation

To reset the machine, turn-off the Power Switch fora few second

then turn-on again.

124