Panasonic Panafax UF-755 User Manual
Panafax® uf-755
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- Panafax® UF-755
- 2. Quick Scanning
- 3. Easy Maintenance
- 4. Memory Function
- 5. Dual Access Operation
- 6.64 level Panasonic Super Gray Scale
- 7. Panasonic Super Smoothing
- 8. Selective Reception
- ¿^CAUTION
- Recording Paper Sub-Tray
- Handset Cradle
- A CAUTION
- Paper Specifications
- How to Load Recording Paper
- 1
- 1
- 2
- 3
- 1
- 3
- If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving, your ID Number will appear on the remote machine’s display and their ID Number will appear on your display.
- We suggest you use your facsimile telephone number as your ID number, but you may use any number up to 20 digits long.
- Enter your ID (max. 20 digits) by using the key pad and
- Ex: [H [S m HSCE] [H [5] [E
- If you make a mistake, press I CLEAR 1 to erase the number then reenter the correct number.
- 5
- 3
- 4
- 5
- 6
- 1
- 3
- 4
- 5
- 6
- 8
- 1
- 3
- 5
- 6
- 7
- 3
- 2
- 1
- 3
- 1
- 2
- 3
- You can choose either Memory Transmission or Direct Transmission.
- Use Memory Transmission if:
- • You want to send the same document to muitipie stations.
- • You have to retrieve the document immediately.
- Use Direct Transmission if:
- • The memory is full.
- • You want to send the document after taiking with the other party.
- Your machine quickly stores the document into the machine’s memory.
- Then, starts to dial the telephone number.
- If the transmission fails, your machine will re-transmit the remaining unsuccessful page{s) automatically.
- Store document in memory
- 1
- 3
- 3
- 1
- 1
- 4
- 1
- 2
- 3
- 1
- 3
- 4
- 3
- 1
- 1
- 3
- 5
- 6
- Set document(s) face down.
- “ i—Make sure that the lamp goes off.
- Enter full station name or part of a station name from character key (see page 9).
- Ex: [BSCS]® for searching PANASONIC
- repeatedly until display shows the station name you want to send to.
- The full number (e.g. 9-555 1234) will be dialed.
- Memory Transmission Reservation (Dual Access)
- 1
- 5
- 2
- 3
- 4
- 1
- 2
- 3
- 1
- 2
- 3
- 2
- 3
- 3
- 1
- 3
- 4
- 1
- 2
- 3
- 1
- 1
- 3
- 4
- 5
- 1 ^
- 2
- 3
- 4
- 5
- 6
- 1
- 2
- 3
- 4
- 5
- Preparing to be Polled
- In order to let other stations poll your machine, you must prepare your machine with a document stored in memory. Be sure to set the polling password before storing the document into memory. After being polled, the documents stored in the memory will be erased automatically.
- Set document(s) face down.
- Preparing to be Polled
- 2
- 3
- 4
- 5
- 2
- 6
- 1
- 3
- 4
- 5
- 2
- 3
- 4
- 6
- 7
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 1
- 2
- 3
- 5
- 2
- 3
- 4
- 5
- 6
- 3
- 4
- 5
- Your machine has a document image memory which enables you to reserve memory transmission, memory deferred transmission, memory polling and so on.
- After reserving the communications in memory, you may need to change the settings of the communications while it is still in memory. This section describes how to use the file editing features.
- Printing a File List
- 1
- 2
- 3
- 1
- 2
- 3
- 4
- 5
- 8
- 7
- 2
- 3
- 1
- 2
- 3
- 4
- 1
- 3
- 4
- 1
- 2
- 3
- 4
- 2
- 3
- 4
- 5
- 1
- 2
- 3
- 2
- 5
- 6
- 2
- 3
- 4
- 5
- 3
- 6
- 1
- 2
- 3
- 4
- 5
- 6
- 1
- 2
- 3
- 4
- 5
- 6
- 3
- 4
- 5
- 7
- 3
- 6
- No special setting is required, your machine comes with this feature ready to use. Your machine receives a confidential fax the same way it receives a normal fax message. When receiving the confidential fax, the display shows following message and printing out CONR RCV REPORT.
- Sample CONF. RCV Report
- Explanation of Contents
- 1
- 3
- 4
- 5
- 1
- 2
- 3
- 4
- 1
- 2
- 3
- 2
- 3
- 1
- 2
- 3
- 4
- 5
- 2
- 4
- 5
- 6
- 1
- 2
- 3
- 4
- 5
- 2
- 6
- 2
- 3
- 4
- 5
- 6
- 8
- 9
- 10
- Sending a Document by Relayed Transmission
- 1
- 2
- 3
- 4
- 1
- 2
- 3
- 1
- 2
- 2
- 3
- 1
- 3
- 1
- 3
- Sample FAX Parameter List
- Explanation of Contents
- Power Failure Report
- This unit has a built-in rechargeable battery installed to retain the document information for up to 1 hour when a power failure occurs.
- However, if the battery system has problems, the document information might be lost. In this case, a Power Failure Report will be printed automatically for each file separately, after the Power is turned ON again. This report is not printed if there were no files in the memory.
- Sample Power Failure Report
- Explanation of Contents
- If You Have Any of These Problems
- Information Codes
- Clearing Recording Paper Jam
- Clearing a Document Jam
- Cleaning the Document Scanning Area
- Cleaning the Printer Roller
- 1
- Machine will print out 3 pages of the Cleaning Chart.
- After printing the Cleaning Chart, the following message will appear.
- Remove the paper cassette from the machine. Then, load the Cleaning Chart into the cassette face down. {See Note)
- Re-instali the paper casette. Machine will automatically feed out the charts in order to clean the printer roller.
- Adjusting the Automatic Document Feeder (ADF)
- Verification Stamp
- Checking the Telephone Line
- Installing Memory Card