Panasonic Panafax UF-755 - Manual (Page 117)

Udumal&ahci Lists
Explanation of Contents
(1) Indication of communication mode
(2) Starting time of communication
(3) Ending time of communication
(4) Fife number
(5) Communication number
(6) Communication result
(7) Abbreviated number or a mark
(8) Recorded name in One-Touch,
ABBR. or direct dialling number
(9) Number of pages transmitted or
received
(10) Program key number
(11) Recorded name in the Program key
(12) Relay Station's ABBR. NO./Network
Address
(13) Own LOGO
(14) Own ID number
(15) Own Character ID
001 to 255 (When the communication is stored into memory, a file number
is assigned for each communication.)
”OK" indicates that the transmission was successful.
"R-OK” indicates that the transmission to the Relay Station was successful.
"INC” indicates that the transmission was not completed.
In this case, the machine will prints out this report attached with the first page
of your document as shown on the sample printout.
: a mark indicates dialed by direct number dial.
The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted.
Up to 25 characters
Up to 20 digits
Up to 16 characters
115