Habey MITX-6771 Owners Manual - Manual (Page 26)

TSM_MITX_20140703_R1-00
Page 25 of 26
Item Field Description
Save Changes and Exit Yes/ No
Select this option to leave the
BIOS setup utility and reboot the
computer for the new system
configuration parameters can
take effect
Discard Changes and Exit Yes/ No
Select this option to quit the
BIOS Setup without making any
permanent changes to the
system configuration, and reboot
the computer
Save changes and Reset Yes/ No
Select this option to leave the
BIOS setup utility and reboot the
computer for the new system
configuration parameters can
take effect
Save Options
Item
Field Description
Save Changes Yes/ No
Select this option to save all
changes made. This will not reset
(reboot) the system
Discard changes Yes/ No
Select this option and press
to discard all the
changes and return to the
AMI BIOS Utility Program
Restore Defaults Yes/ No
Select this option and press
to restore to factory
setting defaults
Save as User Defaults Yes/ No
Select to enables the user to
save any changes to the BIOS
setup for future use
Restore User Defaults Yes/ No
Select to retrieve user-defined
settings that were saved
previously
Boot Override
UEFI: Built-in EFI Shell Yes/ No
Override the Boot Option
Priorities sequence in the Boot
menu and immediately boot the
system with built-in EFI Shell
Launch EFI Shell from
Filesystem device
Yes/ No
Select to launch EFI Shell for
your computer
Reset System with TXE disable
Mode
Yes/ No
Select this item and press
to reset your system
when your system is in TXE
Disabled mode