Flight plans – Garmin GNS 430 User Manual
Page 70
62
Select Arrival? allows you to select a published standard terminal arrival route
(STAR) for the destination airport, or replace the current arrival with a new selection.
(See page 66 for information on selecting arrivals using the
P
key.)
To select an arrival for a direct-to or flight plan destination airport:
1a. Select the “Select Arrival?” option from the active flight plan page options and press
E
.
2a. A window will appear listing the available arrivals for your destination airport. Rotate the small
right knob (
a
) to select the desired arrival and press
E
.
3a. A second window will appear listing available transitions for the arrival. Rotate the small right
knob (
a
) to highlight the desired transition waypoint and press
E
.
4. With “Load?” highlighted, press
E
.
Select Departure? allows you to select a published standard instrument departure
(SID) for the departure airport, or replace the current departure with a new selection.
When using a direct-to, the GNS 430 will use the nearest airport as a reference when
displaying available departures. See page 66 for information on selecting departures
using the
P
key.
To select a departure for the departure airport:
1b. Select the “Select Departure?” option from the active flight plan page options and press
E
.
2b. A window will appear listing the available departures for your departure airport. Rotate the small
right knob (
a
) to select the desired departure and press
E
.
3b. A second window will appear listing available transitions for the departure. Rotate the small right
knob (
a
) to highlight the desired transition waypoint and press
E
.
4. With “Load?” highlighted, press
E
.
FLIGHT PLANS
Active Flight
Plan Options
4
p
a
o
a
n
a
190-00140-00.indd 62
5/7/2003, 5:16:58 PM