Nav pages – Garmin GNS 430 User Manual
Page 46
38
NAV PAGES
Map Page Options
2
p
n
To change a data field:
1. Rotate the large right knob (
d
) to highlight “Change Fields?” and press
E
.
2. Rotate the large right knob (
d
) to highlight the data field you wish to change.
3. Rotate the small right knob (
a
) to select the type of data you want to appear on this field and
press
E
.
4. Press the small right knob (
r
) to remove the cursor.
Restoring Factory Settings
“Restore Defaults?” resets all four user-selectable data fi elds to their original factory
default settings.
To restore the factory default settings, rotate the large right knob (
d
) to highlight
“Restore Defaults?” (see bottom left) and press
E
.
NOTE
The on-screen traffic information will occupy two data fields, leaving
room to display only two additional data types. Traffic information is
only available when the GNS 430 installation includes connection to
traffic information sources. See 400 Series Pilot’s Guide Addendum,
part number 190-00140-13.
190-00140-00.indd 38
5/7/2003, 5:16:37 PM