Baseline Systems FlowStation - Manual (Page 24)

Baseline FlowStation User Manual
5. Press the  button to highlight the Main Line field, and then press the + or – button to select
the mainline that you want this program to use.
Note: A program can only be assigned to one mainline.
6. If you want to enable a booster pump for this
program, press the  button to highlight the
Booster Pump field, and then press the OK
button. The Booster Pump screen displays,
and the booster pumps that you assigned to
the FlowStation are listed.
7. Perform one of the following actions:
 To enable a booster pump for this controller and program, press the  button to
highlight the booster pump, and then press the + or – button to place a checkmark in
the field.
 To disable booster pump for this controller and program, press the  button to
highlight the booster pump, and then press the + or – button to remove the checkmark
from the field.
FlowStation System Setup
Setting the FlowStation Date and Time
Set or change the FlowStation date and time to match the current date and time.
WARNING! Changing the date and time can cause watering events to be missed.
1. Press the System Setup button. The System Maintenance menu displays.
2. The Time & Date Setup option should be
highlighted. If it is not highlighted, press the

or  button to highlight it, and then press
the OK button. The Time & Date Setup screen
displays.
3. In the Time field, notice that the hours
placeholder is highlighted.
 To change the time, press the + or – button.
 To move to the minutes placeholder, press the  button.
4. Press the  button to move to the Date field.
 Press the  or  button to move to the date field that you want to change.
 Press the + or – button to change the value in the field.
Note: The Weekday field is automatically filled in based on the date that was entered.
5. Press the  button to move to the Time Format field, and then press the + or – button to
change the value in the field. This field enables you to switch the time format between
AM/PM and 24 hour settings.
Page 20 4 – Configuring the FlowStation