Unitec EZ Trak - Manual (Page 7)

E Z T R A K
Document Number: EZT1001 3
1.2.2 Mechanical Requirements
It is strongly recommended that the unit be mounted on a concrete slab. The concrete should
be a minimum of 5” inches thick, 21” inches wide, and 13” inches long (Refer to Figure 2).
The dimensions and positioning of the mounting holes for the mounting plate will be covered
in the “Mechanical Installation” section of this manual.
The front edge of the unit should be 18 inches from the driver’s side tire centerline. This
provides the appropriate distance for customers to comfortably reach the unit to swipe their
card or enter their code.
Figure 2. EZ Trak Base Placement
1.3 EZ Trak – Standard Installation
EZ Trak Assembly with Keys
4 anchor bolts with washers (HW2061)
Installation & Operation Manual
100 EZ Trak Fleet Cards
Document Title: EZ Trak Installation and Operations Manual