Unitec EZ Trak - Manual (Page 28)

E Z T R A K
Document Number: EZT1001 24
Appendix B: Connecting EZTrak to Network Hub or Switch
A standard Cat5 cable is used to connect the EZTrak to a network hub or switch using
standard “straight-through” wiring in the connectors. A straight through cable has both ends
with the same pin color code. These cables may be readily purchased from Radio Shack, but
you may also wire the connector yourself. In this case, wire the connectors as follows:
RJ45 Jack and Plug Pin Location
RJ45 Pin #
Wire Color
(T568B) Wire Diagram
(T568B)
1 White/Orange
2 Orange
3 White/Green
4 Blue
5 White/Blue
6 Green
7 White/Brown
8 Brown
Straight-Through Cable Pinout for T568B
Document Title: EZ Trak Installation and Operations Manual