IKA C 2000 control - Manual (Page 73)

IKA  -WERKE C 2000 basic / control Ver. 04 08.07
3DJH
&DUH DQG PDLQWHQDQFH
0DLQWHQDQFH PHQX
The maintenance menu offers you the option of performing a series of system func-
tions manually in the event of a malfunction. The commands of the Maintenance
menu can only be performed if the measuring cell is in the Waiting mode.
The functions 2SHQ 0& , &ORVH 0& , and 2 ILOO are activated by the corresponding
menu command and are automatically terminated. The menu item in question is
locked while the function is being performed.
2SHQ 0& Opens the measuring cell cover
&ORVH 0& Closes the measuring cell cover
&RROLQJ ZDWHU Water flows through the outer vessel and the cooling water
temperature is displayed in a window. The check can be ter-
minated manually with 2. or will be terminated automatically
after 5 minutes.
7HPSHUDWXUH Water flows through the outer vessel and regulation is
(TXDOL]DWLRQ activated. The current target value (25 or 30 °C) is used for
this process. The actual value of the temperature is displayed
in a window. To end the check, press 2. .
6WLUUHU RQRII The stirrer is turned on and off.
(PSW\ ,9 Water is pumped out of the inner vessel.
Emptying is ended by time control (default: 90 sec).
7HPS ,QLW The temperature measurement is reinitialized.
PDLQWHQDQFH
PHQX