Gradall G6-42P (91404003_Before 0160004017) Operation Manual - Manual (Page 3)

11.0 9/24/01 Revised section on checking and adjusting boom.
16.0 7/22/02 Added an additional lubrication notice.
Cover 5/23/03 Revised All
Intro Revised Operator Qualification section.
TOC Added page 20.2 to Table Of Contents.
2.0 Replaced 9140-3525 Decal with 9150-3102 Decal.
2.1 Added 9134-3016 & 9141-3061 Decals & P/N to Angus-Palm Decal.
2.4 Removed 9134-3016 Decal; added 9114-3290 Decal; revised P/N on 9055-3027.
3.0 Revised Operator’s Cab section.
6.0 Revised Optional Cold-Weather Starting Aid section.
9.0 Revised Steering System section.
10.0 Revised General section.
13.1 Removed Figure 13-4, revised Load Center section.
14.7 Revised Figure 14-8.
17.0 Revised Front Axle and Rear Hub Capacities.
18.0 Revised Rear Hub Torque Values; added Flexplate Mounting Bolts Torque Values.
20.1 Added Meritor Axle to title of page.
20.2 Added page for Carraro Axle.
Cover 11/08 Added ending Serial Number
REVISIONS
This page is provided so you may determine that this Manual is complete and current with respect to Gradall
Engineering Specifications.
Page Date Revision
Form No. 20027 • G6-42P Owner/Operator Manual