Pioneer AVIC-F910BT - Manual (Page 137)

The icon 9 is displayed, and op-
eration is not possible.
The operation is not compatible
with the video configuration. This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
The picture stops (pauses) and
the navigation system cannot be
operated. The reading of data is impossible
during disc playback. After touching g once, start playback once
more.
The picture is stretched, with in-
correct aspect ratio. The aspect setting is incorrect for
the display. Select the appropriate setting for that image.
(Page 127, Page 79)
A parental lock message is dis-
played and DVD playback is not
possible. Parental lock is on. Turn parental lock off or change the level.
(Page 79)
Parental lock for DVD playback
cannot be cancelled. The code number is incorrect. Input the correct code number. (Page 79)
Playback is not with the audio
language and subtitle language
settings selected in [
DVD
Setup].
The DVD playing does not feature
dialogue or subtitles in the lan-
guage selected in [
DVD Setup].
Switching to a selected language is not possi-
ble if the language selected in [
DVD Setup]
is not recorded on the disc.
The picture is extremely unclear/
distorted and dark during play-
back. The disc features a signal to prohibit
copying. (Some discs may have
this.) Since the navigation system is compatible
with the copy guard analogue copy protect
system, the picture may suffer from horizon-
tal stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
Cannot be operated. The iPod is frozen. ! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
An error has occurred. ! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
“Acc off”. Then start the engine again, and
turn the power to the navigation system back
on. If this does not solve the problem, press
the
RESET button on the navigation system.
! Update the iPod software version.
Problems with the phone screen
Symptom Cause Action (Reference)
Dialling is not possible because
the touch panel keys for dialling
are inactive. Your phone is out of range for ser-
vice. Retry after re-entering the range for service.
The connection between the mobile
phone and the navigation system
cannot be established now. Perform the connection process.
Appendix
Engb
137
Appendix
Appendix