Konica Minolta bizhub 652 - Manual (Page 16)

bizhub 652/552 3-5
3.2 Installer-based auto install 3
RAW port number/IPP setting of this machine
Change the network settings for this machine according to the connection method or protocol.
- Port9100: In [TCP/IP Settings], enable the RAW port number (initial setting: [9100]).
- IPP/IPPS: In [IPP Settings], enable IPP printing.
d
Reference
For details on TCP/IP setting and IPP setting for this machine, refer to [User's Guide Network Administrator].
Before you can use IPPS printing, you must register a certificate with this machine. You can use the self-
signed certificate that is preinstalled in this machine. For details, refer to [User's Guide Network Administra-
tor].
3.2.3 Installing
Reference
- Installing the driver to Windows XP/Vista/7/Server 2003/Server 2008/Server 2008 R2-based computers
requires the administrator authority.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
% Make sure that the installer starts, and then go to Step 2.
% If the installer does not start, open the printer driver folder on the CD-ROM, double-click [Set-
up.exe], and then go to Step 3.
% If a wizard window for adding new hardware opens when using USB connection, click [Cancel].
% When installing the driver on a Windows Vista/7/Server 2008/Server 2008 R2-based computer, click
[Allow] or [Continue] if the [User Account Control] window appears.
2
Click [Printer Install].
The printer driver installer starts.
3
To agree with all terms in the license agreement, click [AGREE].
% If you disagree, you will not be able to install the driver.
% In the language display box, you can change the language used with the installer as required.