Power Soak 27746 PS-200 Owner's Manual - Manual (Page 11)

7
Adding Detergents & Sanitizers
Manual Chemical Dispensing
After the sinks have been filled with water, add the proper amount of
detergent and sanitizer. The detergent goes into the wash sink (the sink
with the water jets) and the sanitizer goes into the sanitizer sink (the last
sink).
Be sure to add the proper amount of chemicals to each sink. The amount
to be used should be provided by your chemical supplier. Do not add the
detergent or sanitizer to the sink prior to or during filling.
Most detergents and sanitizers lose effectiveness as time goes on. Some
local health departments have requirements limiting the amount of time
water can be used for cleaning before the water should be changed. Most
chemical companies recommend changing wash water after a certain time
frame. Those times vary, but are generally around four hours. Check with
your chemical provider.
Check with your chemical provider on how often to replace your sanitizer.