Power Soak 33019 PS-50 Owners Manual - Manual (Page 6)

5
Requirements for Detergents and
Sanitizers
Detergents
Remember, improper detergents may damage equipment! Use of the correct
detergent in your
Power Soak system is critical to its washing performance. If you
are having problems with cleaning results, please contact the factory.
Your new system requires a low-foaming, metal/aluminum-
safe detergent that is safe for the hands. The detergent
should have good grease cutting abilities but not have an
excessively high pH level.
Sanitizers
The method of sanitizing used in your
Power Soak system is a "chemical
sanitizing" method. There are a number of products on the market that work well.
Your chemical sales representative should assist you in selecting the proper
sanitizer for your application.
Check with your cleaning chemical provider to determine detergent concentration,
sanitizer "parts per million" (ppm) and sanitizer submersion times to meet local
health codes.
Factory Assistance
If your chemical sales representative is having difficulty selecting a detergent or
sanitizer, or if you are getting poor results with the chemicals your representative
has recommended, please contact the factory at 800-444-9624.