Power Soak 33019 PS-50 Owners Manual - Manual (Page 15)

14
Preventive Maintenance
Your system requires minimal, routine preventive maintenance. As such, the
following should be done on a routine basis to ensure that your system remains
reliable:
Monthly
IMPORTANT: Turn off the power to the unit at the main
breaker prior to performing the following task!
Clean the pump motor fan shroud with a damp, soapy rag. The motor shroud is the
"vented" cover located at the end of the motor (closest to the control panel). This
will prevent grease and dust from accumulating in the cover's openings, which can
obstruct the airflow that cools the motor.
De-lime the wash sink. Simply add a de-liming agent to a sink of warm, fresh water
and run the system overnight.
Ask your chemical sales representative to recommend a specific de-liming agent.
There are no other preventive maintenance procedures that you will need to
perform on your
Power Soak system. You need not be concerned about greasing
the motor bearings, as they are permanently sealed. If you have any questions
regarding the preventive maintenance procedures, please contact the factory at
800-444-9624.