Power Soak 33019 PS-50 Owners Manual - Manual (Page 10)

9
Controls and Features
On/Off Switch
Starts and stops the washing action.
Starting and stopping the wash action
To start the wash action, turn the ON
/OFF switch until the red arrow points to “ON”.
A strong “rolling” wash action should be present.
To stop the wash action, turn the ON/OFF switch until the red arrow points to
“OFF”.
Introducing Pots and Pans to the Power Soak
Dirty pots and pans should be brought to the Power Soak in a timely manner. Do
not allow items to sit and air dry. The quicker that items are brought to the
Power Soak and put in the wash tank, the easier they are to clean!
Properly Scrapping Pots and Pans
Excess soils should be removed from the pots and pans prior to dropping them in
the wash sink.
Deposit the excess soils into a garbage can.
Some systems may have an optional pre-scrapping area with a pre-rinse spray. If
so, soils may be deposited into the scrapper sink.